2025 Iveco Eurocargo ML140E28/P ml140e28
Vehicle Overview
This 2025 Iveco Eurocargo ML140E28/P is configured as a ready-to-use tipper, combining a medium-duty cab chassis with a purpose-built body and automatic transmission. With just 49 km displayed, it presents as a near-new working vehicle while being listed as used.
Its main appeal is the practical tipper conversion. The body measures 4.2 metres long and 2,430 mm wide, with 450 mm split dropsides, removable posts and rear barn doors to support flexible loading and unloading. Rope rails and side steps add useful day-to-day functionality, while the 5 mm floor, 3 mm sides, and 4 mm headboard and tailgate provide a clearly work-focused specification. Twin underbody rams operate the tipping body, with a PTO and pump matched to the automatic transmission.
The body is finished in white two-pack paint and includes blue plates, lighting and signage to RMS specifications. These details give the truck a complete, operational presentation rather than leaving the buyer to arrange a separate body build or compliance work.
Power comes from Iveco's Tector 7 engine, quoted here at 280 hp with 1,000 Nm of torque. The eight-speed ZF automatic transmission is suited to work that involves frequent stops, manoeuvring and repeated loading cycles, while removing the need for manual gear changes during routine operation. The vehicle is specified with diesel power and a 280-litre fuel capacity.
The advertised configuration is described as offering a 7-tonne tipper payload. The listed gross vehicle mass is 14,000 kg and gross combination mass is 17,500 kg, giving the Eurocargo a specification aimed at substantial commercial carrying duties while retaining the familiar cab-chassis format.
- 2025 Iveco Eurocargo ML140E28/P
- 49 km
- Diesel Tector 7 engine
- 280 hp and 1,000 Nm of torque
- Eight-speed ZF automatic transmission
- 4.2 m by 2,430 mm tipper body
- 450 mm split dropsides with removable posts
- Rear barn doors and rope rails
- 5 mm floor, 3 mm sides, 4 mm headboard and tailgate
- Twin underbody rams with PTO and pump
- 14,000 kg GVM and 17,500 kg GCM
- 280-litre fuel capacity
As presented, this Eurocargo is a complete tipper truck rather than a bare cab-chassis platform. Its automatic drivetrain, substantial body construction and stated payload make the specification particularly focused on straightforward commercial use where loading access, tipping equipment and carrying capacity are central requirements.
Other highlights include Condition: Used Vehicle; Transmission: 8 Speed ZF Auto; Engine or motor: Tector 7 280hp 1000nm Torque Engine.
Specifications
- Year
- 2025
- Make
- Iveco
- Model
- Eurocargo
- Variant
- ML140E28/P
- Condition
- Used
- Body type
- Cab Chassis
- Transmission
- 8 Speed ZF Auto
- Fuel
- Diesel
- Engine or motor
- Tector 7 280hp 1000nm Torque Engine
- Exterior colour
- White
- Odometer
- 49 km
- Stock reference
- be9888ec1c73
Location
See where this vehicle is located and estimate the distance from your postcode.
Newcastle Hino
1 Kinta Drive, Beresfield, NSW, 2322, Australia
Estimate your distance
Enter your postcode to estimate the straight-line distance to Newcastle Hino (Beresfield, NSW, 2322).
Estimate calculated postcode-to-postcode using Australian postcode coordinates.Similar vehicles
Ranked by closest year, make and model match first, then nudged toward the same location where available.
2026 Iveco Daily 50C18 daily 50c18
50C18 Manufacturer Certified
$86,990
- Odometer 48 km
- Body type Light Trucks
- Fuel Diesel
- Transmission 8-Speed Zf Automatic
2026 Iveco Daily 70C21
70C21 Manufacturer Certified
$86,936
- Odometer 48 km
- Body type Cab Chassis
- Fuel Diesel
- Transmission 8 Speed Zf Auto
