2025 Isuzu N Series NKR 62/45-150 DT D25 Tipper

49 photos

New Arncliffe, NSW, 2205

2025 Isuzu N Series NKR 62/45-150 DT D25 Tipper

$93,850

Model Range

$77,833 - $173,927

Based on the range of 2025 Isuzu N Series listings currently visible on DriveMarket.

View matching listings

Odometer 200km

Body type Tipper

Fuel Diesel

Transmission Automatic

Vehicle Overview

The 2025 Isuzu N Series NKR 62/45-150 DT D25 Tipper is a new, ready-to-work truck configured around a compact steel tipping body and a 6,200 kg GVM. Its 2,490 mm wheelbase supports a manoeuvrable footprint, while the 4x2 axle layout is suited to paved urban and job-site access routes where a practical combination of payload capacity and manageable dimensions is important.

Power comes from Isuzu's 4JZ1-TCS four-cylinder turbo-diesel, producing 110 kW at 2,800 rpm and 375 Nm between 1,280 and 2,800 rpm. The engine is paired with a nine-speed dual-clutch transmission, listed on the vehicle page as automatic, giving the truck an accessible drivetrain for frequent stop-start work. A 70-litre fuel tank and 14-litre steel AdBlue tank are fitted, while the stated GCM is 8,000 kg and towing capacity is 4,000 kg.

The steel tipper body measures 3,050 mm long, 1,970 mm wide and 370 mm high externally, with an internal width of 1,780 mm and a quoted 2.0 cubic metre volume. Its drop sides help with loading and unloading, while the auto-release body lockdown hook and auto-release two-way tailgate are designed to simplify repeated tipper operation. Rope rails on both sides add flexibility when securing suitable loads, and the hydraulic body is specified to raise in approximately 20 seconds and lower in approximately 30 seconds.

Attention to everyday durability continues through the body construction, which uses a 3.2 mm deck plate and 2.3 mm side, front and tail plates. Non-slip side steps assist access around the body, and the truck is equipped with a reversing camera, reverse alarm and Isuzu low-light capability. Front and rear axle capacities are listed at 2,600 kg and 5,000 kg respectively, with Michelin 205/75R16C tyres at both ends.

The cab is equipped for long working days with automatic climate control and a 10.1-inch high-definition touchscreen. Truck-tailored GPS navigation includes live traffic and map content updates, while Android Auto and Apple CarPlay compatibility provide familiar smartphone integration. Wi-Fi connectivity is also specified. Bi-LED headlamps with LED daytime running lamps and LED tail lamps improve the lighting package and give the truck a contemporary presentation.

With only 200 km displayed, this NKR presents as a near-new work vehicle rather than a high-mileage used truck. Its combination of a compact wheelbase, steel tipper body, automatic dual-clutch transmission and integrated cab technology makes the specification focused on straightforward daily operation. The listed chassis warranty is six years or 250,000 km with unlimited hours, and the service interval is 25,000 km, 12 months or 500 hours, whichever occurs first.

6,200 kg GVM and 8,000 kg GCM
4,000 kg towing capacity
2.0 cubic metre all-steel tipper body
Four-cylinder turbo-diesel engine with 110 kW and 375 Nm
Nine-speed dual-clutch automatic transmission
Automatic climate control and 10.1-inch touchscreen
GPS navigation, Apple CarPlay and Android Auto
Reversing camera, reverse alarm and LED lighting

Other highlights include Odometer: 200km; Engine or motor: Isuzu 4JZ1-TCS 4 Cylinder Turbo Diesel, 110 kW @ 2,800 rpm, 375 Nm @ 1,280-2,800 rpm.

Specifications

Year: 2025
Make: Isuzu
Model: N Series
Variant: NKR 62/45-150 DT D25 Tipper
Condition: New
Body type: Tipper
Transmission: Automatic
Fuel: Diesel
Drive train: 4x2
Engine or motor: Isuzu 4JZ1-TCS 4 Cylinder Turbo Diesel, 110 kW @ 2,800 rpm, 375 Nm @ 1,280-2,800 rpm
Odometer: 200km
VIN: JAANKR88ES7100089
Stock reference: C11062